Steel Framed Buildings

INTAKS scaffold and edge protection configurations are suitable for use on steel framed buildings. The versatility of the INTAKS System allows you to handle whatever your clients present you with.

Installation process

The install process is easy to follow and complete – for example, for Attached 1M Down scaffolding:

  1. Lay out Soleboards and Screwjacks where Standards are required.
  2. Mark out position, 1 metre down from top plate, to attach Stud Brackets to building frame.
  3. Attach Stud Brackets.
  4. Configure support frames.
  5. Put support frames into position.
  6. Install platform with Interlocking Planks.
  7. Create Ladder access and install Swing Gate.
  8. Install Handrails using tool-less Spring Clip mechanism.
  9. Install Toeboards using tool-less Toeboard Plank Clips.
  10. Complete final checks and handover to site manager.

Components

Components are sturdy, robust, and easy to handle. The components below are for Attached 1M Down scaffolding.

For handrails:

  • Handrail Tube (part #HR4 to HR#6)
  • Handrail Joiners/External Sleeve Couplers (part #1165/#SES)
  • Fixed 90° Couplers (part #SFC) and/or Swivel Couplers (part #SSC) – for joining handrails at corners
  • Handrail Post (part #1101) – for safely installing handrails on upper levels

For each support frame:

  • 1 x Soleboard (part #ISB)
  • 1 x Screwjack (part #SSJ450 or #SSJ620)
  • 1 x Extender (part #1144/#1160)
  • 1 x Platform Arm Bracket (part #1076)
  • 1 x Standard Arm (part #1172 to #1177)
  • 1 x Standard (part #1178 to #1181)
  • 1 x Square Spring Clip (part #1146)
  • 1 x Stud Bracket (part #1003), Stud Bracket Narrow (part #1005), Stud Bracket Bent Long (part #1006), or Stud Bracket Bent Short (part #1004)

For platforms:

  • Interlocking Planks (part #ILP3 to ILP6)
  • Plank Staples (part #1158)
  • Plank Clamps – Single (part #1087) / Double (part #1080) / Tube (part #1079)
  • Toeboards (part #1210)
  • Toeboard Clips – Plank (part #1211)

Other:

  • Lock Pins (part #1182)
  • R-Clip (part #1900)
  • Ladder (part #LAD3.6/#LAD5.4)

Note: exact components required will vary depending on set-up and site specific requirements

Scaffold / edge protection equipment & solutions

Please fill out the form below