Floor Mounted

INTAKS Floor Mounted edge protection system provides a versatile solution wherever concrete or timber floor edges require fall protection. Simple to erect and dismantle. Compatible with INTAKS Toeboards and INTAKS Mesh Screens for added protection.

Installation process

Installation is straight-forward and can be checked with ease:

  1. Boot Brackets bolted or screwed onto floor with Ankascrew bolts (concrete) or Coachscrews (timber).
  2. Handrail Post inserted into Boot Bracket and secured in place using the tool-less Lock Pin & R-Clip mechanism.
  3. Handrails secured to Handrail Posts using the tool-less Spring Clip mechanism.
  4. Toeboards or Mesh Screen can then be installed against the edge protection, as required.
  5. Complete final checks and handover to site manager.
  6. Dismantle process is the reverse to installation.

Components

Precision-manufactured steel yellow brackets and durable, rust-free, aluminium.

For handrails:

  • Handrail Tube (part #HR4 to HR#6)
  • Handrail Joiners/External Sleeve Couplers (part #1165/#SES)
  • Fixed 90° Couplers (part #SFC) and/or Swivel Couplers (part #SSC) – for joining handrails at corners

For each post:

  • 1 x Handrail Post/Swivel Handrail Post (part #1101/#1102)
  • 1 x Boot Bracket (part #1148)
  • 2 x Lock Pins (part #1182)
  • 2 x R-Clips (part #1900)

Note: exact components required will vary depending on set-up and site specific requirements  

Scaffold / edge protection equipment & solutions

Please fill out the form below