Face Fixed - Commercial

This configuration provides edge protection for tilt slab-constructed buildings or other concrete edges where protection is required. Easy to install and adjust. Dependable, innovative engineering that will keep you ahead of the curve.

Installation process

Installation follows a simple, repeatable process:

  1. Installer works from safety of a scissor lift or EWP.
  2. Boot Bracket bolted onto concrete with Ankascrew bolts.
  3. Standard Arm and Handrail Post inserted into Boot Bracket. Secured in place using tool-less Lock Pin & R-Clip mechanism.
  4. Depending on height, handrail tubes can be handed up to EWP from the ground. A handrail tube only weighs around 6kg.
  5. Handrails secured to Handrail Posts using tool-less Spring Clip mechanism.
  6. Complete final checks and handover to site manager.
  7. Dismantle process is the reverse to installation.

Components

Precision-manufactured steel yellow brackets and durable, rust-free, aluminium.

For handrails:

  • Handrail Tube (part #HR4 to HR#6)
  • Handrail Joiners/External Sleeve Couplers (part #1165/#SES)
  • Fixed 90° Couplers (part #SFC) and/or Swivel Couplers (part #SSC) – for joining handrails at corners

For each post:

  • 1 x Handrail Post/Swivel Handrail Post (part #1101/#1102)
  • 1 x Standard Arm (part #1172)
  • 1 x Boot Bracket (part #1148)
  • 2 x Lock Pins (part #1182)
  • 2 x R-Clips (part #1900)

Note: exact components required will vary depending on set-up and site specific requirements  

Scaffold / edge protection equipment & solutions

Please fill out the form below