Face Fixed - Light Commercial

This edge protection configuration provides excellent flexibility and multiple bracing options. It can be quickly installed on steel- and timber-framed buildings by a two person team.

Installation process

Installation is typically done with one person in an EWP and the other person on the ground:

  1. Boot Bracket screwed onto purlin with Tek screws.
  2. Handrail Post inserted into Boot Bracket and fixed in place using the tool-less Lock Pin & R-Clip mechanism.
  3. Installer on ground hands handrail tubes up to installer in EWP. Each tube weighs only around 6kg.
  4. Handrails secured to Handrail Posts using the tool-less Spring Clip mechanism.
  5. Appropriate bracing is put in place as required.
  6. Complete final checks and handover to site manager.
  7. Dismantle process is the reverse to installation.


Robust and light aluminium components allow quick and safe installation:

For handrails:

  • Handrail Tube (part #HR4 to HR#6)
  • Handrail Joiners/External Sleeve Couplers (part #1165/#SES)
  • Fixed 90° Couplers (part #SFC) and/or Swivel Couplers (part #SSC) – for joining handrails at corners

For each post:

  • 1 x Handrail Post/Swivel Handrail Post (part #1101/#1102)
  • 1 x Standard Arm (part #1172 to #1177)
  • 1 x Boot Bracket (part #1148)
  • 2 x Lock Pins (part #1182)
  • 2 x R-Clips (part #1900)
  • Additional components for bracing, as required

Note: exact components required will vary depending on set-up and site-specific requirements.

Scaffold / edge protection equipment & solutions

Please fill out the form below